BuildLimit
<h3>Additional Zone-specific Standards - Maximum Floor Area</h3> <p>The maximum floor area of a single-family unit, including associated accessory structures, is calculated using the following formulas. Basements are excluded from maximum floor area calculations. Maximum Scale of Development Standards still apply.</p> <ul> <li>For BSA ≤ 0.11 ac, Maximum Floor Area (sf) = (BSA)(0.43)(43,560).</li> <li>For BSA 0.11-0.172 ac, Maximum Floor Area (sf) = (BSA-0.11)(0.2833)(43,560)+2,060.</li> <li>For BSA 0.172-0.5 ac, Maximum Floor Area (sf) = (BSA-0.172)(0.124)(43,560)+2,825.</li> <li>For BSA >0.5 ac, Maximum Floor Area (sf) = (BSA-0.5)(0.032)(43,560)+4,596.</li> </ul> <p>In certain subdivisions, the result of the above calculation is further multiplied by a specific factor to determine the maximum floor area:</p> <ul> <li>Subdivision Ellen Creek, Multiplier 1.35.</li> <li>Subdivision Jackson Hole Golf and Tennis Club, Multiplier 1.15.</li> <li>Subdivision NC-TVSF, Multiplier 1.4.</li> <li>Subdivision Spring Creek Ranch, Multiplier see PUD.</li> <li>Subdivision Teton Pines (JH Racquet Club Resort), Multiplier see PUD.</li> </ul>
This section provides the formulas for calculating the maximum floor area of a single-family unit in the NC-TC zone, including specific multipliers for certain subdivisions.