BuildLimit
<h3>Additional Zone-specific Standards - Maximum Site Development</h3> <p>The maximum site development of a single-family unit, including associated accessory structures, is calculated using the following formulas:</p> <ul> <li>For ASA ≤ 0.1 ac, Maximum Site Development (sf) = (ASA)(0.6)(43,560).</li> <li>For ASA 0.1-0.5 ac, Maximum Site Development (sf) = (ASA-0.1)(0.31)(43,560)+2,614.</li> <li>For ASA 0.5-3 ac, Maximum Site Development (sf) = (ASA-0.5)(0.11)(43,560)+8,015.</li> <li>For ASA 3-35 ac, Maximum Site Development (sf) = (ASA-3)(0.040344)(43,560)+19,994.</li> <li>For ASA > 35 ac, Maximum Site Development (sf) = (ASA)(0.05)(43,560).</li> </ul> <p>Certain elements are exempt from the calculation of maximum site development:</p> <ul> <li>Public and neighborhood pathways, flood control levees, ponds.</li> <li>Outdoor riding arenas on properties 6 acres or larger. To be exempt, the riding arena must be an uncovered area no larger than 160 feet by 200 feet, constructed of natural materials, without bleachers, and with 12 foot wide gates at 2 ends that must remain open for wildlife movement when not in use.</li> </ul> <p>In certain subdivisions, the result of the above calculation is further multiplied by a specific factor to determine the maximum site development:</p> <ul> <li>Subdivision Ellen Creek, Multiplier 1.23.</li> <li>Subdivision Jackson Hole Golf and Tennis Club, Multiplier 1.17.</li> <li>Subdivision NC-TVSF, Multiplier 1.44.</li> <li>Subdivision Spring Creek Ranch, Multiplier see PUD.</li> <li>Subdivision Teton Pines (JH Racquet Club Resort), Multiplier see PUD.</li> </ul>
This section provides the formulas for calculating the maximum site development of a single-family unit in the NC-TC zone, including exemptions and specific multipliers for certain subdivisions.